Manufacturer : Speedy Bee / Référence : SB-F405-V4
F405 V4 30x30 SFlight Controller By SpeedyBee
En stock
€44.90
Shipping costs
from 49€ pour France
Same day shipping
for orders placed before 3:30pm (Monday to Friday)
Related accessories
Technical characteristics
The SpeedyBee F405 V4 flight controller mounts in 30.5x30.5mm, configures via Bluetooth and is compatible with the DJI O3 / Runcam Link / Caddx Vista and DJi air unit VTX.
The FC is equipped with an ICM42688P gyro, a USB Type-C port, a barometer and an ATZ456E OSD.
Specifications
- MCU : STM32F405
- IMU(Gyro) : ICM42688P
- USB Port Type : Type-C
- Barometer : Built-in
- OSD Chip : AT7456E chip
- BLE Bluetooth : Supported.
- WIFI : Not supported
- Compatible with DJI O3/RunCam Link/Caddx Vista/DJI Air Unit
- ESC Signal : M1 - M4 on bottom side and M5-M8 on front side.
- UART : 6 sets(UART1, UART2, UART3, UART4(Dedicated for Bluetooth connection)), UART5(Dedicated for ESC telemetry),UART6
- ESC Telemetry : UART R5(UART5)
- I2C Supported.
- Traditional Betaflight LED Pad : Supported. 5V, G and LED pads on bottom of the front side. Used for WS2812 LED controlled by Betaflight firmware.
- Buzzer : BZ+ and BZ- pad used for 5V Buzzer
- Power Input : 3S - 6S Lipo
- RSSI Input : Supported.
- Smart Port / F.Port : Not supported
- Firmware Target Name : SPEEDYBEEF405V4
- Mounting : 30.5 x 30.5mm( 4mm hole diameter)
- Dimension : 41.6(L) x 39.4(W) x 7.8(H)mm
- Weight : 10.5g
Included
- 1x F405 V4 FC
- 5x M3*8mm grommet
- 1x Sh 1.0mm 30mm 8pin cable
- 1x DJI 6pin cable